Commercial metal repair in Utah

Cracked tabs, bent covers and worn mounting holes on the metal parts your business relies on, repaired at our bench and handed back ready to bolt on again.

Grey steel guard cover with a cracked mounting tab held in a bench vise while a gloved hand marks the crack

Most broken metal parts are not worth throwing away. A machine guard with one cracked ear, a steel cover that took a hard knock, a display bracket that has been bent back and forth until it no longer lines up: each of these still has most of its life left. Commercial metal repair at Simper Metal Worx means we take that part into the shop, find out exactly what failed, and rebuild the damaged area so the part fits and works the way it did before.

We work for businesses. Shops, small manufacturers, sign makers, restaurants and retail stores with steel fixtures, equipment builders and maintenance crews bring or ship parts to us. All of the work happens inside our shop, on our benches and machines, and the finished part goes back to you for your own team to fit.

What lands on the repair bench

  1. Cracked tabs and ears

    Mounting tabs that split at the bend or around a bolt hole are cut back to sound metal and rebuilt.

  2. Bent covers and guards

    Sheet and plate covers that took a knock are straightened on the press and checked against a flat table.

  3. Torn or stretched holes

    Holes that have gone oval are filled, dressed and drilled again in the right place.

  4. Worn brackets and mounts

    Brackets with chewed edges or loose fits get new material where it wore away.

  5. Broken hinge plates

    Hinge leaves and plates are repaired or remade so the door or lid closes square again.

  6. Steel fixture frames

    Store and shop fixture frames with a failed joint are brought back together and dressed clean.

How a repair moves through the shop

  1. Look and talk

    You drop off the part or send clear photos. We look at the damage, ask how the part is used and what failed around it.

  2. Written quote

    We write down what we plan to do, which areas get rebuilt and what stays as it is, and send the quote before any work starts.

  3. Bench work

    The damaged area is cleaned to bare metal, cut back where needed, rebuilt, straightened and dressed to shape.

  4. Fit check and pickup

    We check the part against your mating part, a sample or your measurements, then call you when it is ready.

Repair or replace: how we tell

A repair makes sense when the original part is hard to get, when it was made to fit one specific machine or fixture, or when only one small area has failed. If the metal around the damage is thin, heavily rusted or cracked in several places, we say so and suggest making a new part from your old one instead. That choice is yours, and the quote shows both paths when both are possible.

It helps a great deal if you can tell us what the part bolts to and what happened when it broke. A crack that keeps coming back usually has a reason, such as a missing support or a bolt that was never tight. When we can see the cause, we can often add a little material or a small gusset so the repair outlasts the original weak spot.

Commercial metal repair: questions

Something else on your mind? Call the shop at (775) 678-1312.

Where does the repair work happen?

Every repair happens inside our shop. Your team removes the part, brings or ships it to us, and fits it again after we hand it back.

What metals do you repair?

Mild steel, stainless steel and aluminum make up most of what we see. If you are unsure what a part is made of, bring it in and we will check it with you.

Will the repaired area look different?

Usually it is dressed smooth and close to the original shape. If looks matter, say so, and we will grind and blend the repair to suit.

Do you need the whole assembly?

Only the damaged part, plus anything it has to line up with. Send the mating piece if the fit is tight.

Get help with commercial metal repair

Send the request with a short description of the part. We follow up during shop hours and ask for photos or drawings by email.