Metal grinding services in Utah

Edges, faces, weld beads and burrs ground clean and even on steel, stainless and aluminum parts, one at a time or as a full batch.

Shop worker seen from behind with a lowered face shield grinding a steel plate edge as orange sparks fly

Grinding is where a rough part becomes a finished one. A cut edge that is sharp and uneven, a weld bead that sits proud of the surface, a mounting face that rocks on a flat table, a plate edge with heavy scale: all of these are cleaned up at the grinding station in our shop.

We grind for other shops and businesses that do not have the time, the space or the dust control to do it in house, and for parts that come through our own repair and fabrication work. Small parts are ground on bench and belt machines, larger plates and frames with hand grinders on a heavy steel table, always with face shields down and guards in place.

Typical grinding jobs

  1. Cut edge cleanup

    Sharp, rough or scaled edges on sheet, plate and bar ground even and safe to handle.

  2. Weld bead blending

    Beads taken down flush or blended to a smooth radius so the joint disappears under paint.

  3. Flat faces

    Mounting faces ground flat so a bracket or plate sits square without rocking.

  4. Edge breaking

    A light chamfer or round on every edge of a batch so nobody cuts a hand on it.

  5. Scale and rust removal

    Mill scale and surface rust taken off to bright metal ahead of paint or finish.

  6. Blending repairs

    Repaired areas ground and feathered into the original surface.

From rough to ready

  1. Agree on the finish

    You tell us how the part will be used and how it should look: flush, smooth, brushed or ready for paint.

  2. Quote in writing

    We note the areas to grind and the finish level, and confirm it with you before we start.

  3. Grind and dress

    Coarse grit removes the material, finer grits bring the surface to the agreed finish.

  4. Clean and pack

    Parts are wiped down, edges checked by hand, and packed so finished faces do not rub.

Grinding a batch the same way

On a run of parts, the hardest thing is making the fortieth part look like the first. We grind the first piece, show it to you or send photos, and once you are happy with it we use it as the reference for the rest of the batch. Every part is checked against that first piece before it goes into the box.

Grinding also takes material away, so for parts with tight fits we confirm how much can come off before we start. If a face must stay at a certain size, we tell you up front how we will work around it and what we will check.

Metal grinding services: questions

Something else on your mind? Call the shop at (775) 678-1312.

Can you grind stainless without marking it?

Yes. Stainless gets its own discs and belts so it is not contaminated with steel dust, which keeps it from spotting later.

Can you grind welds done by another shop?

Yes. Many of our grinding jobs are parts welded elsewhere that need the beads blended or the edges cleaned.

Do you grind aluminum?

We do, with tools kept only for aluminum so they do not clog or carry steel into the surface.

How large a part can you grind?

Anything that fits on our benches and tables and can be handled safely. Tell us the size and we will confirm.

Get help with metal grinding services

Send the request with a short description of the part. We follow up during shop hours and ask for photos or drawings by email.